Table of Contents(Maintenance):
- Cylinder Cover(Fuel valve bore , Exhaust valve and Starting valve bore),Cylinder Liner and Cylinder Lubrication
- Piston with Rod & Stuffing Box,Crosshead with Connecting rod,Crankshaft
- Thrust Bearing and Turning Gear,Mechanical Control Gear
- Starting Air System,Fuel Oil System,Turbocharger System,Safety Equipment system
spare parts(Table of Contents):
Crankshaft, Thrust Bearing and Turning Gear Crankshaft, Mechanical Control Gear ,Piston with Rod & Stuffing Box,Cylinder Liner and Cylinder Lubrication, Crosshead Bearing, Fuel Pump,Auxiliary Blower(Blower Wheel,Complete Blower Unit,Blower Wheel,Electric Motor),Turbocharger Turbine(Cleaning Procedure:1.Carry out cleaning for every 24 to 50 hoursof operation, based on observations. 2.Preferably clean the turbocharger at fullload. Do not clean below half load.3.Close valve A.4.Open valves B and C, to blow out any deposits and/or condensate in the connectingpipe.After about two minutes, close valves B andC.5.Slowly open valve A to relieve the pressurein the tank.6.Fill the tank with the quantity of granulesspecified in the table.7.Close valve A.8.Open valves B and C, to blow-in the granules. After one to two minutes, close valvesB and C.9.Slowly open valve A to relieve the pressurein the tank.) Water Mist Catcher,Travelling Trolley,Safety Valve(the valve spindle,the spring,the adjusting screw,the lock nut)